Subscribe to this RSS feed
Rico Cheung

Rico Cheung

2022/09/22

PA-C60PB-60W Wall Mount Mixing Amplifier

PA-C60PB-60W Wall Mount Mixing Amplifier

Specification

Model: PA-C60PB

Output Model: 

  • Direct output: 100V or 70V & 4Ω 
  • Line Out @10kΩ , 1V +1/-3dB

Output Power: 60W

Frequency Response: 

  • 100V Output: 110Hz~ 18kHz +1/-3dB
  • 4Ω Out: 110Hz~ 18kHz +1/-3dB
  • Line Out : 110Hz ~ 20kHz +1/-3dB

Input Sensitivity / Impedance: AUX Unbalance 300mV (+1/-3dB) /10KΩ,

                                                MIC 5mV (+1/-3dB) / 600Ω

Tone Control:-10dB

  • Lo 100Hz:  +8dB ~ -8 dB +/-2dB
  • Hi 10kHz:   +8dB ~ -8 dB +/-2dB

Operation Temperature: -10 ºC to +45 ºC

Operational Power: 100~240 VAC +/-10% , 50Hz/60Hz

Power Consumption: 100W

Dimension (mm): W250 x D 280 x H 48

Net Weight: 2.5 KG

 

Features

  • 60W Power Output with High/ Low Impedance
  • Two Mic. Input and Two AUX Input with Line OUT
  • Phantom Power for ALL Microphone Inputs
  • Combo XLR/TRS Input Socket for Mic 1 & 2
  • Override Function Available ( Mic 1)
  • Slim Wall Mount Type Design
  • One Screw Fixed and Release Whole Machine
  • Phoenix Connector for Speaker Output
 
Published in AVS
Tagged under
Read more...
2022/09/21

ktv-400S-avs-karaoke-mixing-amplifier

KTV-400S

FEATURES

  • 400W x 2 Powerful Output
  • 4 Modes Preset EQ ( KTV, MUSIC, CINEMA and MEETING )
  • 4 Levels Feedback Control
  • Bluetooth Receiver
  • Individual 3 Bands EQ for MUSIC and MIC
  • Save Mode for New EQ Setting
  • Center and SUBWOOFER Output Port
  • USB and Wifi Ports for PC Control and Upgrade
  • Dual Speaker Output Ports (Speakon and Banana Connectors)

TECHNICAL SPECIFICATION

Signal and NoiseRatio(SNR)

  • Music: ≥91db
  • Microphone: ≥80db

Frequency Response

  • Music: 10HZ-20KHZ/‡3.0db
  • Microphone: 50HZ-20KHZ/‡3.0db

Gain

  • Music: 10db+1.0db
  • Microphone: 26db+1.5db

Total Harmonic Distortion(THD)

  • Music: ≤0.6% output XLR 1 Vrms 1 Khz
  • Microphone: ≤0.8% output XL 1 Vrms 1 Khz

Pc Port: USB For Upgrade and Control
Bluetooth: Yes
RS-232: Yes
Size(mm): 430(W) x 360 (D) x 100 (H)
Weight: 15kg

Published in AVS
Tagged under
Read more...
2022/09/21

PA-C60PB-USB-60W Wall Mount Mixing Amplifier

PA-C60PB-USB-60W Wall Mount Mixing Amplifier

Specification

Model: PA-C60PB-USB

Output Model: 

  • Direct output: 100V or 70V & 4Ω 
  • Line Out @10kΩ , 1V +1/-3dB

Output Power: 60W

Frequency Response: 

  • 100V Output: 110Hz~ 18kHz +1/-3dB
  • 4Ω Out: 110Hz~ 18kHz +1/-3dB
  • Line Out : 110Hz ~ 20kHz +1/-3dB

Input Sensitivity / Impedance: AUX Unbalance 300mV (+1/-3dB) /10KΩ,

                                                MIC 5mV (+1/-3dB) / 600Ω

Tone Control:-10dB

  • Lo 100Hz:  +8dB ~ -8 dB +/-2dB
  • Hi 10kHz:   +8dB ~ -8 dB +/-2dB

Operation Temperature: -10 ºC to +45 ºC

Operational Power: 100~240 VAC +/-10% , 50Hz/60Hz

Power Consumption: 100W

Dimension (mm): W250 x D 280 x H 48

Net Weight: 2.5 KG

 

Features

  • 60W Power Output with High/ Low Impedance
  • Two Mic. Input and Two AUX Input with Line OUT
  • Phantom Power for ALL Microphone Inputs
  • Combo XLR/TRS Input Socket for Mic 1 & 2
  • Override Function Available ( Mic 1)
  • Slim Wall Mount Type Design
  • Built-in USB Sound Card ( Model: PA-C60PB-USB )
  • One Screw Fixed and Release Whole Machine
  • Phoenix Connector for Speaker Output
Published in AVS
Tagged under
Read more...
2022/06/30

USB Dual Pre Project Series – Two Ch USB Pre

USB Dual Pre Project Series – Two Ch USB Pre

Overview

 

The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case.

It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced.

The USB Dual Pre is powered via the USB bus. An internal 9 Volt battery, or optional external 12V power supply (or any combination of USB, battery & power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session).

The built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus.

For monitoring, an 1/8-inch TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. The monitor mix is also routed to the 1/4-inch TRS balanced outputs. This lets you use the 1/4-inch outputs as either preamplifier outputs or as the monitor feed to your powered monitors.

The USB interface is fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with the USB audio device drivers built into Windows 98SE/ME/2000/XP/Vista and Apple OS9.1/OSX computers with native USB support. No special drivers are needed.

  • USB Connectivity to Desktop and Laptop Computers
  • Low Noise Fully Balanced XLR and 1/4-inch TRS Combi Inputs
  • Up to 48 dB of Clean Gain n Built-in Low Noise Phantom Power Supply
  • Latency Free Monitoring Mix and Level Controls
  • Independent Channel Gain Controls
  • 1/4-inch TRS Balanced Monitor and 1/8-inch Headphone Monitor Outputs
  • Includes Audacity Recording & Production Software
  • Flexible 3-way Power from USB, External Supply, or 9 Volt Battery
  • Includes USB Cable – Everything Needed To Start Recording Today!
Published in ART Pro Audio (2)
Tagged under
Read more...
2022/06/30

6 Ch (1U) Stereo Mixer w/ EQ/EFX Loop

6 Ch (1U) Stereo Mixer w/ EQ/EFX Loop

Overview

The MX622 is a versatile mixer combining three balanced microphone or line level inputs with three stereo line inputs into a single stereo line level mix. Essential features include external effects loop (mono send with stereo return), independent stereo record outputs, stereo TRS 1/4-inch balanced outputs and full range master two-band equalizer. The internal power supply and single rack-space 19-inch rack mount format allows for easy installation and reliable long-term operation.

 

 

Key Features

  • Three Balanced XLR Inputs Switchable Mic/Line Level
  • Three Stereo RCA Inputs with Separate Level Controls
  • Level Control and Clip Indicators
  • Selectable 15-volt Phantom Power for Mic Channels
  • Balanced TRS 1/4-inch Main Output Jacks with Master Level Control
  • Versatile Two-Band Master EQ
  • Separate Stereo Record Outputs
  • Effects Loop with Level Independent Level Control

 

Specifications

Input Connections XLR-F balanced (x3)
1/4-inch unbalanced (x2)
3 pairs stereo RCA (6 total)
Output Connections TRS balanced 1/4-inch (x2)
1/4-inch unbalanced (x1)
RCA (x2)
Input Impedance 600/22K Ω mic/line XLR inputs / 10K Ω RCA inputs / 22K Ω 1/4-inch effects returns
Output Impedance 50 Ω 1/4-inch main outputs / 1K Ω RCA record outputs / 100 Ω effects output
Total Harmonic Distortion .01% Typical
Signal to Noise Ratio > 90dB typical
Maximum Input Level -10dBu/+20dBu mic/line XLR inputs / +20dBu RCA line inputs / +20dBu Effects inputs
Maximum Output Level +24dBu balanced main outputs / +20dBu RCA record outputs / +20dBu Effects output
Maximum Gain 56dB/26dB mic/line / 26dB RCA inputs
Phantom Power +15Volts DC (regulated / low noise)
Power Requirements USA – 105 to 125 VAC / 50-60Hz, 15 W typical
Equalizer Range +/-12dB @ 100Hz & 10kHz
Dimensions 1.75″H x 19″W x 6.0″D (44.5mm x 483mm x 152mm)
Weight 6.2 lbs (2.8 kg)
 
Published in ART Pro Audio (1)
Tagged under
Read more...
2022/06/20

MultiMic

MultiMic

https://fitnessaudioshop.com.au/blogs/news/multimic-connection-world-first

 

More and more Fitness Instructors are realizing the importance of having their own fitness microphones in preventing the transmission of germs between them and their colleagues. 

This is a fantastic step in improving hygiene practices in fitness centers, however it does pose issues relating to the compatibility of their microphones with the audio equipment at the gyms in which they work. 

Not all mics made for one brand can be used with a different wireless brand because of the internal wiring. Some brands use connectors that have 4 pins (T4 connectors), while others use connectors that have 3 pins (T3 connectors). However, each brand chooses their own wiring of the pins inside the transmitter, so the one mic will not function in any T3 or T4 transmitter brand as the wiring is different. This is bad news for Instructors wanting to buy their own fitness mic, especially if they work at different brands of gyms- until now!

AVS is now introducing a world-first MulitMic which manufactured from Australia.


All our mics are now manufactured with our new MultiMic connectors. This allows the Aeromics, Cyclemics and E-mics fitted with a T3 or T4 connector work in any brand of transmitter with the matching panel plug! 

In simple words, if our mic plugs in, it will work regardless of the transmitter’s brand or internal wiring. 

If you have any questions regarding to the product, please feel free to contact us.

 

Selecting the right connector:

T4 MultiMic - Suits all brands of T4 Connectors including: Fitness Audio, Shure, Chiayo, Mipro, Toa, JTS, EV, Telex and many more.

T3 MultiMic  - Suits all brands of T3 Connectors including: AKG, Samson, Redback, Okayo and many more.

Published in Microphones for Fitness Instructors
Tagged under
Read more...
2022/06/20

New Product Introduction - June 2022

We would like to introduce the following newly launched items to you all! Please kindly find the detail informations on the product page.

If you have any enquires regarding to the product, please feel free to contact us for further information.

 

1. Yorkville 50W 3.5" Multimedia Reference Monitors - YSM3BT

https://www.avshk.com/products/professional-sound-system/710-ysm3-bt

 

 

2. ART Pro Audio - PDB  (Passive Direct Box)

https://www.avshk.com/products/professional-sound-system/art-pro-audio/711-passive-direct-box 

 

3. Fitness Audio - MultiMic:

https://www.avshk.com/products/fitness-audio/aeromic/714-multimic?fbclid=IwAR13a4zES-kctWnOiUIzFNbuAseHM7A3V4FZ8JOt61AKj1qk_iiwky3NmXo

 

Published in News
Tagged under
Read more...
2022/06/20

Passive Direct Box

Passive Direct Box

 

Overview

The PDB™ Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs.

The PDB™ also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.

 

PDB Applications:

  • Electric guitar and bass pick up output signals – The high impedance signal from a guitar or bass guitar pickup is translated by the PDB™ into a low impedance balanced signal required by mixing consoles.

  • Keyboards and line level signals – The PDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the PDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the PDB™ and then to the console (instead of a separate DI box for each keyboard).

  • DJ console output signals – DJ mixers often supply only an unbalanced -10dB signal. The PDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables.

  • Speaker level signals – The PDB’s ability to accept speaker level inputs from a power amplifier’s output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix.

 

Specifications

Frequency Response 10 Hz – 50 kHz +/- 0.5dB @ +4dBu
Output Connections 600 Ω XLR Output Jack
Ground Lift Switchable
Input Attenuation Switchable (0dB, -20dB, -40dB)
Instrument Input 50k Ω
Parallel Link Jack 50k Ω
Dimensions 3″ x 5″ x 2″

 

Published in ART Pro Audio (1)
Tagged under
Read more...
2022/06/20

YSM3-BT

YSM3-BT

Features

  • 3.5" low frequency drivers; 1" silk dome tweeters
  • BLUETOOTH enabled for wireless streaming
  • Easy access Front ON//OFF Volume switch
  • Front 1/8" aux input for quick sound source connection
  • Headphone jack for private listening
  • Includes 1/8" to Dual RCA Cable
  • 18"-1/8" cable and speaker wire for easy connection

 

Specifications

System Type 2.0 Powered Studio Monitor
Frequency Response (Hz +/- 3db) 82Hz-20KHz
Crossover Frequency (Hz) 3.0KHz
HF Driver(s) 0.75 inch silk domed tweeter, 6 ohm
LF Driver(s) 3.5 inch, 4 ohm
LF Power Amplifier (Watts) RMS 25W x 2
LF Amplifier Type Class AB
Inputs TRS stereo balanced, RCA stereo, 1/8 inch Aux stereo, Bluetooth
LED Indicators LED ring around volume knob on front panel
Dimensions (DWH xbackW, inches) 6.3 x 5.6 x 8.6
Dimensions (DWH xbackW, cm) 16 x 14.15 x 21.8
Weight (lbs/kg) 7 / 3.2

Specifications subject to change without notice

Published in Active Speaker
Tagged under
Read more...
2022/06/14

AVS TAN-3800 UHF Antenna Splitter

AVS TAN-3800 UHF Antenna Splitter
Published in Wireless Microphone
Tagged under
Read more...
Page 1 of 12