Rico Cheung

Rico Cheung

Feature:

  • First H.265 encoding supporting conference video camera. It enables full HD 1080p60 videostream with ultra-low bandwidth.
  • Support Panasonic's 1/2.7 inch, 2.07 million effective pixels with high quality HD CMOS sensor.The camera can reach a maximum of 1920 x 1080 high resolution and achieve high-qualityimage.
  • The output frame rate can be up to 60fps in 1080P, and up to 120fps in 720P (supported bynetwork only), and up to 240fps in 640x480P (supported by network only, optional).
  • Built-in face detection module which enables PTZ tracking (optional).
  • Support AAC audio encoding. Better sound quality and smaller bandwidth can be achieved.
  • Support local storage. Video records can be directly stored to local USB flash disk without NVR.
  • High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm, effectivelyreduce the noise. Even under low illumination conditions, clear images can still be acquired.
  • Support HDMI output and 3G-SDI interface. Effective transmission can be performed within adistance of up to 100 meters. Supports SD CVBS output.
  • Use TAMRON high-quality super telephoto lens, supporting 12x optical zoom and 16x digital zoom.
  • Use RS232/485 interface. All parameters of the camera can be remotely controlled by the high-speed communication.
  • Support "Freeze During Preset" function, can mask the image when calling the preset.

 

Product Specification

 

Camera

 

Video System

HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25,720p/60, 720p/50,720p30,720p25, 720p/120 (supported by S Model only), 640x480p/240 (supported by S Model only, optional)

SD: NTSC, PAL

Sensor

1/2.7", CMOS, Effective Pixel: 2.07M

Scanning Mode

Progressive

Lens

12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8

Digital Zoom

16x (optional)

Minimal Illumination

0.05 Lux @ (F1.8, AGC ON)

Shutter

1/30s ~ 1/10000s

White Balance

Auto, 3000K/Indoor, 4000K,5000K/Outdoor,6500K-1,6500K-2,6500K-3, One Push, Manual

Backlight Compensation

Support

Digital Noise Reduction

2D&3D Digital Noise Reduction

Video S/N

≥55dB

Horizontal Angle of View

72.5° ~ 6.9°

Vertical Angle of View

44.8° ~ 3.9°

Horizontal Rotation Range

±170°

Vertical Rotation Range

-30° ~ +90°

Pan Speed Range

1.7° ~ 100°/s

Tilt Speed Range

1.7° ~ 69.9°/s

H & V flip

Support

Image Freeze

Support

PoE

Support (optional)

Face Detection

Support (optional)

Local Storage

Support

Number of Preset

255

Preset Accuracy°

0.1°

 

IPC Features

Video coding standard

H.265/H.264/MJEPG

Video Stream

First stream, Second stream

First stream resolution

1920x1080,1280x720,1024x576,960x540,640x480,640x360

Second stream resolution

1280x720,1024x576,720x576,720x408,640x360,480x270,320x240,320x180

Bit Rate

128Kbps ~ 8192Kbps

Bit Rate Type

Variable rate, fixed rate

Frame Rate

50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps, 720p120: 120fps (supported by S Model only), 640x480p240: 240fps (supported by S Model only, optional)

Audio standard

AAC

Audio rate

96K,128K,256k

Support protocols

TCP/IP, HTTP, RTSP, RTMP, multicast, DHCP, Onvif etc

Input/Output Interface

HD Output

1xHDMI: Version 1.3

1x3G-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M standard

SD Output

1xCVBS: RCA jack, 1Vp-p, 75Ω

Network interface

1xRJ45: 10/100/1000M Adaptive Ethernet ports

Audio Input

1-ch 3.5mm audio interface, Line In

USB

1xUSB2.0: type A jack

Communication interface

1xRS-232 IN: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/Pelco-P

1xRS-232 OUT: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA network use only

1xRS-485: 2pin Phoenix port, Max Distance: 1200m, Protocol: VISCA/Pelco-D/Pelco-P

Power jack

JEITA type (DC IN 12V)

Generic Specification

Input Voltage

DC 12V / PoE (802.3af) (optional)

Current Consumption

1.0A (Max)

 

Operating Temperature

-10°C ~ 40°C (14°F ~ 104°F)

Storage Temperature

-40°C ~ 60°C(-40°F ~ 140°F)

Power Consumption

12W (Max)

MTBF

>30000h

Size

169mm x 142mm x 164mm

Net Weight

1.35Kg (3.0lb)

AVS Outdoor Gain Antenna with SMB-101

 

- Frequency Range: 740 to 790MHz

- Gain: 5-8dB Typical

- Length: 340mm

2022/02/14

HKEX 2021

Key Feature:

  • Input accept balanced and unbalanced XLR and 1/4” Plugs
  • Total 8 of Mic. IN / 8 of LINE IN and 8 output ports
  • 2 Output L & R and 4 AUX with Volume Control knob
  • 2 Auxiliary Main Output can be send to other PA system
  • USB port accepts a USB cable for connection to a computer for multi-channel audio recording
  • Ethernet port allows the mixer to be controlled via LAN or connected Wifi router
  • Free download Software can be control all functions, including channel level, Trim control, EQ, output level, effector….etc

 

Specification  
Number of processing channels 16 input channels, 4 aux buses, main LR + main L+R+
Internal effects engines 4 true stereo
Signal processing 40-bit floating point
A/D-D/A conversion (Cirrus Logic A/D CS5368, D/A CS4385) 24-bit @ 44.1 / 48 kHz, 114 dB dynamic range
Analog I/0 latency* 0.8 ms
 
Connectors
Programmable mic preamps, designed by MIDAS 14XLR/TRS combo jacks, balanced + Hi-Z TRS LINE IN
Main outputs 2 XLR, balanced
Aux outputs 6 XLR, balanced impedance
Ethernet 1 RJ45
Audio/Midi Interface 1 USB Type B
   
Mic Input Characteristics  
Preamp Design MIDAS
THD + noise, 20dB gain, 0 dBu out <0.005%, A-weighted
Phantom power, switchable per output 48V
Equivalent input noise level, XLR (input shorted) -128 dBu, A-weighted
CMRR, XLR, @20 dB gain (typical) >60dB
CMRR, XLR, @ 40 dB gain >65dB
   
Input/Output Characteristics  
Frequency range, @48 kHz sample rate, 0 dB to -1dB 10 Hz – 22 kHz
Dynamic range, analog in to analog out (typical) 105 dB
A/D dynamic range, preamp to converter (typical) 109 dB
D/A dynamic range, converter and output 108 dB
Cross talk rejection @1kHz, adjacent channels 90 dB
Mic 1-8 Input impedance XLR jack, unbal. /bal. 5k Ω / 10k Ω
Non clip maximum input level, XLR +23 dBu
Hi-Z 15-16 Input impedance TRS jack, unbal. /bal. 1MΩ / 2MΩ
Line 9-14 Input impedance TRS jack, unbal. /bal. 5kΩ/ 10kΩ
Line 15-16 Input impedance RCA/TRS 10kΩ
Non clip maximum input level, RCA/TRS +16 dBu
   
Output Characteristics  
Output impedance, XLR, unbal. /bal. 50Ω / 50Ω
Output level, XLR, nom. /max. +4 dBu / +16dBu
Output impedance, TRS, unbal. /bal. 50Ω / 50Ω
Output level, TRS, nom. /max. +4 dBu / +16dBu
   
Physical Characteristics  
Dimensions (W x D x H) 485 x 215 x 90 mm (2u)
Net Weight 4.3kg

 

 

2022/01/04

Party 500

2021/12/14

AECO 8

Functional Overview

Our AECO 8, certainly lives up to its name. This ACME tailor-made, eco-environment and maintaining light quality fixture, emphasizes the color rendering to the top one. Equipped with the High Color Rendering 750W LED Engine, the natural white light@6000K is ready to light up your next show through its 165mm frontal lens. We make up our mind to revolutionize the color of the AECO series, so you will see the perfect Red(630nm±3nm), Green(535nm±3nm), and Blue(450nm±3nm) after mixing the innovative CMY flags. Not only delivers excellent macro colors, but also features the color rendering of RA≥95 & R9≥90 with no compromise--AECO 8, is destined to be your universal choice: front light and also major light.

Additional benefits include variable CTO from 6000K to 2700K, a color wheel, a rotating gobo wheel, an animation wheel, a 4-facet prism, 2 different frost filters, and 4 smooth shutter blades. With a total lumen output of 23,000lm, the AECO 8 is an energy-saving framing profile light, which ideal for stages, theatres, dance halls, broadcasting, fashion shows, etc.

 

Features

  • Fits a 750W LED engine and its front lens is 165mm diameter
  • Color Temperature: 6,000K
  • Total lumen output up to 23,000 lm
  • Color Rendering:
    • Ra≥95,R9≥90,R15≥95
    • TLCI≥95,CCI:0-0.5G
    • TM-30 Rf: 91
    • TM-30 Rg: 99
  • Motorized focus
  • Linear CMY color mixing
  • Excellent color macro effect
  • Variable CTO: 2700K-6000K
  • Rotating gobo wheel: 1 rotating gobo wheel with 6 gobos, convenient replacment
    • Image diameter: 25mm
    • Outside diameter: 37.3 mm
  • Color wheel: 1 color wheel with 6 colors
  • Animation wheel: 1 animation wheel with outstanding water and flame effect, the effect disk can rotate and be replaced
  • Prisms: 1pc 4-facet prism rotatable in either direction
  • Beam Angle: 7°-45°
  • Frost: 2 different frost filters to create and improve the wash effect. They can be used independently and overlayed
  • Motorized linear Iris
  • Smooth dimming from 0-100%
  • Outstanding strobe effect with various speeds
  • 4 x fast and smooth framing shutters; The position and the angle of each shutter blade can be controlled individually; Each shutter blade can block out light completely; The framing module can rotate at ±60 degrees
  • 2 x fixed clamps for 50mm truss
  • Flicker free management
  • Dust-proof and oil-proof design

 

Model

  • AECO 8

 

Light source

  • Light Sources: 750W LED engine
  • LED life expectancy: 20000 hours

 

Optical System

  • Advanced optical system to ensure image quality, clear and sharp
  • High - efficiency optical system, zoom ratio 1:6.4
  • Diameter of front lens is 165 mm
  • Beam Angle: 7°-45°

 

Control & Program

  • 4-buttons touch panel
  • Display: LCD display
  • Protocols: DMX512, RDM, Art-Net, sACN
  • DMX Protocol modes: 2
  • Control channels: 33,28
  • Pan/Tilt Resolution: 16 bit
  • Firmware Upgrade: Upgrade via DMX link or USB disk

 

PAN & TILT

  • Pan movement: 540°
  • Tilt movement: 270°
  • Fixation: Pan/Tilt lock
  • Automatic Pan/Tilt position correction

 

Rotating Gobos

  • 1 x rotating gobos, with 6 gobos plus open, convenient replacement
    • Image diameter: 25mm
    • Outside diameter: 37.3 mm
  • Thickness: 1.1 mm
  • Max. thickness: 2.5mm
  • borofloat or better glass materials
  • Set with "SLOT & LOCK" system for gobos replacement

 

Color Wheel

  • 1 x color wheel with 6 colors

 

Framing System

  • Blade: 4 fast and smooth framing shutters, each shutter blade position and angle can be controlled individually;
  • Movement is fast & smooth, with adjustable speed
  • Framing shutters can be precise motion with smooth movement
  • Each shutter blade can block out light completely, the framing module can be rotated at ±60°

 

Electrical & Connectors

  • Power supply with electronic auto-ranging
  • Input voltage range: 100-240V~ 50/60Hz
  • Power consumption: 1205 W
  • Power In/Out:Power Connector in/out or Power Cord Out
  • Date In/Out:3-pin or 5-pin XLR,RJ45

 

Fixture Specification

  • Height: 793 mm (31.2")
  • Width: 352 mm (13.9")
  • Depth: 465 mm (18.3")
  • Weight: 42 kg (92.6 lbs)
  • Flight Case Dimensions:
    • Height: 905 mm (31.2")
    • Width: 595 mm (13.9")
    • Depth: 715 mm (18.3")
    • Weight: 88.3 kg (194.7) lbs (Dual Loader Case)

 

Work environment

  • Maximum ambient temperature: 40°C
  • Maximum surface temperature: 65°C
  • Minimum operating temperature: 0°C

 

Approvals

  • CE compliant

 

Installation

  • Horizontally or vertically mounting are available
  • Operating position is universal
  • 2 x fixed clamps for 50 millimeter truss
  • Safety Rope Hole

 

Included items

  • Digital User Manual
  • Power Cable
  • 2 x fixed clamps for 50 millimeter truss

 

Optional Accessories (with item code)

  • Raincover:3033001750
  • Safety cable: 2060001603-A(SW-05)
  • Signal Line:3-pin & 5-pin signal line

P-3248D is a high performance yet cost-effective digital booster amplifier equipped suited
for broadcasting, paging, or background music in schools, offices, shops, houses of worship and large ballrooms.

Power Source 100 - 240 V AC, 50/60Hz or 24 V DC
Rated Output 480 W
Power Consumption 99 W (AC operation at 1/8 maximum output without clip)
Frequency Response 50 - 20,000 Hz
Input Line In: 0 dB*, 10 kΩ, balanced, screw terminal
100 V Line In: 40 dB*, 30 kΩ, unbalanced, screw terminal
Output Speaker out: Speaker Output in screw type terminal
Direct line (selectable): 21 Ω (100 V) or 4 Ω
Rec out: 0 dB*, 600 Ω, unbalanced, screw terminal
Control Remote power control, screw terminal
Remote master volume bypass, screw terminal
S/N Ratio Over 70 dB
Total Harmonic Distortion Under 1% at 1 kHz, 1/3 rated power
Tone Control Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
Indicator Power, Signal , Peak
Ventilation Fan Cooling
Finish Panel: ABS resin, black
Case: Steel plate, black
Dimensions 420 (W) × 100.9 (H) × 351.3 (D) mm
Weight 5.2 kg 

Functional Overview

The ACME PASODOBLE, using 12 pcs 8W RGBW LED, combines powerful output, shiny beam and colorful wash into its solid body. In order to meet the professionals requirement, we designed PASODOBLE as a versatile soldier, featuring 0~100% smooth dimming with 4 variable dimming curves, an outstanding strobe effect with variable speed, variable preset macro effects and smooth color mixing & changing, to create psychedelic effect. Very suitable for bars, ball rooms, night clubs, and other entertainment applications.

 

Features

  • Outstanding color mixing effect
  • Compact design, small size
  • Smooth dimming from 0-100%
  • The toolless buckle is designed for multiple units jointed in the horizontal or vertical setup.
  • Optional diffusion film (Filed angle 55 °)

Model

  • PAR 12

 

TECHNICAL SPECIFICATIONS

Specifications

  •  Light Source:12 x 8W RGBW LED
  •  Beam Angle:14°
  •  Field Angle: 25°/55°
  •  Total lumen output up to 2815lm (25°)/1898lm(55°)

Control

  • DMX channel:10/8/5/4 channel
  • Protocols:DMX512, RDM
  • Firmware Upgrade via DMX link

Construction

  • Display:OLED display
  • Data In/Out:3-pin XLR
  • Power In/Out:Power Connector in/out
  • Protection Rating:IP20

Electrical and Physical

  • Input Voltage Range:AC100-240V, 50/60Hz
  • Power Consumption:85W
  • Dimensions:239 x 257 x 88mm (9.4" x 10.1" x 3.5")
  • Carton Dimension:640 x 330 x 450mm (25.2" x 13.0" x 17.7")
  • Weight:3 kg (6.6 lbs)
  • 22.3 kg (49.2 lbs)( Six-pack per carton )
Page 4 of 12